N836 Ride-On Power Trowel with Honda GX690 – 1910 mm Working Width

The N836 ride-on concrete power trowel machine is designed for floating, compacting, smoothing and finishing large newly poured concrete floors. Powered by a 24HP Honda GX690 gasoline engine, this double-rotor power trowel provides a 1910 mm working width, eight trowel blades and adjustable operating speeds for industrial floor construction.

N836 Ride-On Concrete Power Trowel Machine

The FloorSupply N836 is a professional ride-on concrete power trowel machine for large industrial and commercial concrete flooring projects. It helps contractors complete concrete floating, surface compaction, smoothing and final finishing with less manual labor.

With a 1910 mm working width and a double-rotor, eight-blade system, the N836 covers large concrete surfaces efficiently. It is suitable for newly poured concrete floors in factories, warehouses, logistics centers, parking garages, workshops and commercial buildings.

24HP Honda GX690 Gasoline Engine

The N836 concrete power trowel is powered by a Honda GX690 gasoline engine with a rated output of 17.6 kW (24HP).

The engine provides stable power for continuous concrete floor finishing. A 15 L fuel tank supports extended operation on large construction sites.

1910 mm Double-Rotor Working Width

The N836 ride-on power trowel has two rotor assemblies and eight trowel arms. Its 1910 mm working width enables contractors to finish large concrete slabs more efficiently than with conventional walk-behind power trowels.

The two 970 mm rotor pans provide consistent surface coverage for floating, leveling, compacting and finishing fresh concrete.

Adjustable Speed for Concrete Finishing

The rotor speed can be adjusted from 70 to 150 r/min. Operators can select a suitable speed according to the concrete curing stage and required surface finish.

• Lower speeds are suitable for initial floating and surface leveling.

• Medium speeds support concrete compaction and intermediate finishing.

• Higher speeds are used for final smoothing and surface finishing.

Compatible with Float Pans and Trowel Blades

The N836 concrete finishing machine can be configured with different working tools:

• Float pans for initial floating and slurry generation

• Combination blades for floating and intermediate finishing

• Finishing blades for final smoothing and surface finishing

The machine uses eight blades. The finishing blade size is 355 × 150 mm, while the combination blade size is 355 × 200 mm.

Center-Linked Steering System

The center-linked steering controls allow the operator to move the machine forward, backward, left and right with precise control.

This steering configuration improves maneuverability and helps reduce operator fatigue during long concrete finishing operations.

Adjustable Blade Pitch

The graduated blade-pitch system allows the operator to adjust the trowel blade angle accurately.

Blade pitch can be increased gradually as the concrete hardens, helping the machine move from initial floating to final finishing without changing equipment.

Operator Comfort and Job-Site Safety

The padded operator seat can be adjusted forward and backward by 15 cm. The machine also includes a foot-operated safety switch for faster stopping during operation.

Additional features include:

• Front LED work lights

• Integrated water-spray system

• Instrument display

• USB charging port

• Reinforced one-piece frame

• Impact-resistant protective rings

N836 Ride-On Power Trowel Applications

This ride-on concrete power trowel is suitable for:

• Industrial factory floors

• Warehouse concrete floors

• Logistics and distribution centers

• Underground parking garages

• Commercial building floors

• Airport hangars

• Production workshops

• Large outdoor concrete slabs

• Dry-shake hardener floors

• Concrete bases for epoxy flooring

• Concrete bases for densified and polished floors

The N836 is intended for newly poured concrete. It is not a floor grinder and should not be used to remove coatings or grind fully cured concrete.

N836 Technical Specifications

Why Choose the FloorSupply N836?

• 24HP Honda GX690 gasoline engine

• Wide 1910 mm concrete finishing path

• Double-rotor system with eight trowel blades

• Adjustable 70-150 r/min operating speed

• Compatible with float pans and different blade types

• Precise center-linked steering controls

• Adjustable blade-pitch system

• Reinforced frame for professional construction sites

• LED work lights for low-light working conditions

• Integrated spraying system

• One-stop supply of machines, blades, pans and spare parts

Complete Concrete Floor Construction Solution

FloorSupply supplies concrete floor construction machines, floor grinders, industrial vacuum cleaners, diamond tools, power trowel blades, float pans, spare parts and floor chemicals.

Contact FloorSupply with your project area, concrete type and required surface finish. Our team will help you select a suitable concrete finishing machine and working tools.

Frequently Asked Questions

What is the N836 ride-on power trowel used for?

The N836 is used for floating, compacting, smoothing and finishing newly poured concrete floors. It is suitable for large industrial and commercial concrete slabs.

What engine does the N836 use?

The N836 uses a Honda GX690 gasoline engine rated at 17.6 kW or 24HP.

What is the working width of the N836?

The N836 ride-on concrete power trowel has a working width of 1910 mm.

How many blades does the N836 have?

The machine has two rotor assemblies with a total of eight trowel blades.

Can the N836 use float pans?

Yes. The N836 can use float pans for initial floating and concrete surface leveling. It can also use combination blades and finishing blades.

Is the N836 suitable for grinding cured concrete?

No. The N836 is a concrete finishing machine for newly poured concrete. A concrete floor grinder should be used for coating removal, surface grinding and cured concrete polishing.

Where can the N836 be used?

The machine is suitable for factories, warehouses, logistics centers, parking garages, workshops, airport hangars and other large concrete floor projects.